Flight Performance: Mini 5 Pro offers 36 minutes of flight time (vs. 34 mins on Mini 4 Pro), maximum takeoff altitude of 6000m (vs. 4000m), and a faster top forward speed of 18 m/s (vs. 16 m/s).

Battery Charging Efficiency: A single battery charges in about 46 minutes (vs. ~58 mins on Mini 4 Pro). With the Two-Way Charging Hub, three batteries can be fully charged in around 115 minutes total.

DJI Mini 5 Pro is C0 certified by the European Union Aviation Safety Agency (EASA). To request a switch to EU C1 classification, contact DJI Support in the DJI Fly app.

No. Avoid contact with water during use, as it may damage the device. If it rains during the flight, return and land as soon as possible, and wait until the drone is fully dry inside and out before using it again.

DJI Mini 5 Pro can only be used with the DJI Fly app. You can download the latest version of DJI Fly from the DJI Mini 5 Pro Downloads page on the official DJI website. If you use DJI RC 2 as the remote controller, it comes with the pre-installed DJI Fly app.

1. Dirt and debris can lead to false obstacle detection. Keep the forward-facing LiDAR clean to ensure accurate obstacle sensing.

2. The LiDAR works automatically in moderately lit environments, but it will not function properly in bright light. Pay attention to ambient light conditions to maintain safe flight operations.

1. Enhanced Nighttime Obstacle Sensing: Even in extremely dark conditions where the ambient light is less than 1 lux and the vision sensing system becomes ineffective, the forward-facing LiDAR can still provide forward obstacle sensing for the drone. This ensures that the drone can detect obstacles and perform timely stops at night.

2. Safer Nighttime RTH: During nighttime return-to-home operations, if the vision sensing system is ineffective, the drone can use the forward-facing LiDAR to sense forward obstacles and navigate upwards to avoid them*, making the return flight safer. If the drone reaches its altitude limit while ascending around obstacles, it will hover at that height.

When recording video at 60fps or lower, DJI Mini 5 Pro enables HDR mode by default.

Yes. The USB-C port supports power input up to 9V/3A (with 9V/3A charger).

You can customise the C1/C2 button, the right dial, and other controls of DJI RC 2 in the DJI Fly app for more convenient control.

No.

In different environments, the wireless interference level is different, and the max transmission distance will vary.

Unobstructed
Strong Interference: Urban landscape, approx. 1.5-4 km
Medium Interference: Suburban landscape, approx. 4-10 km
Low Interference: Suburb/seaside, approx. 10-20 km

Obstructed
Low Interference and Obstructed by Buildings: approx. 0-0.7 km
Low Interference and Obstructed by Trees: approx. 0.7-4.5 km

Data tested under FCC standard in obstructed or unobstructed environments with typical interference. Used for reference purposes only and provides no guarantee for actual transmission distance.

When the drone is connected to the remote controller and a new firmware version is available, the DJI Fly app will send you a firmware update prompt. You can follow the instructions to update the firmware for the drone, remote controller, battery, and other devices.

You can also update via the DJI Assistant 2 (Consumer Drones Series) software on a computer. The latest version of the software can be downloaded from the DJI Mini 5 Pro Downloads page on the official DJI website.

1. The battery level of the drone or remote controller is below 20%.
2. The drone or the remote controller is powered off during an update. If this happens, restart the drone and remote controller, and try again.
3. The network is disconnected during a firmware download.
4. Your smartphone interface is switched to other apps during a firmware download.

The drone will restart multiple times during an update and automatically power off after completing the update.